Pubblica nuovo annuncio
 Tutti gli annunci nella sottocategoria

Plumbing and Heating Services North London

- Gas Safe Registered

- Smart Thermostat Installation

- Boiler Service and Repair

- Gas, Plumbing and Heating Services

- Landlord Gas Safety Certificates

- Many Satisfied Customers

 

Boiler Repair

Repair of broken boilers and central heating components in North London

Need your boiler repaired? At ASP Plumbing & Heating, we aim to arrive within a few hours, carry out a speedy diagnosis and provide you with a fair, fixed price based on our hourly rate. Our boiler repair service is conducted as quickly as possible to cause you as little inconvenience as possible so that you can have your home as warm as you like and enjoy those nice hot showers.

Boilers tend to break down when you need them the most, in the winter! This isn’t just because they are working overtime, the cold weather can freeze the condensate pipe which blocks the discharge of waste water and prevents the boiler from firing.

Breakdowns aren’t always caused by faulty boiler components. Sometimes the problem can lie with the pipework, external circulating pump or motorised diverter valves. The build-up of sludge and debris in heating system pipework is a common contributing factor when it comes to the failing of pumps and sub-par heat output from radiators. Having your heating system power flushed is great way to rid your heating system of sludge and debris, enabling it to run far more efficiently and with a greater heat output.

We specialise in repairing some of the biggest boiler names on the market, including Vaillant, Worcester, Baxi, Potterton, Glow Worm and Ideal. So, if your boiler is in need of repair, just get in touch and we’ll be round to sort it out.

Your boiler repair won’t cost the earth either! We charge £70 + Vat an hour, but we’ll tell you up front how long we think it’s going to take. The first hour on site is fully chargeable. Additional time will be charged at 15 minute increments. This way you only pay for the time we spend repairing your boiler.

 

Boiler Service

Gas Safe Boiler Service

An annual boiler service is essential for keeping your boiler running safely and efficiently.

While a boiler service cannot prevent every unforeseen issue, it can help to reduce the risk of breakdowns, detect early signs of leaks and check the key safety features of the appliance.

During a boiler service we will clean the burner, heat exchanger and fan, replace the gaskets, check the safety devices, empty and refill the condensate trap (condensing boilers only), check gas working pressures and carry out a flue gas analysis. Our service is thorough and adheres to the highest of standards.

Prevention is key because we know that a broken boiler, at any time of the year, especially in the depths of winter isn’t something you want to have to deal with. An annual boiler service will give you peace of mind that your boiler will run smoothly, especially when you need it most.

 

Heating System Installations

Compulsory Annual Checks by Registered Engineers

Upgrading your boiler can be a daunting decision, but often a necessary one. As boilers age, they become less reliable, less efficient and in some cases, more dangerous. If your current boiler is constantly breaking down or costing you a fortune in gas bills, it may be time to upgrade to a cleaner, more efficient model. Whether it’s a straight boiler swap or a full heating system overhaul, ASP Plumbing & Heating Services can provide you with guidance on choosing a new system to suit your needs.

Why Upgrade my heating system?
Modern boilers boast high energy efficiency ratings, some as much as 100%. Replacing your old, inefficient boiler with an A-rated appliance could see a drastic reduction in your gas bill. In most cases, the boiler will pay for itself in a matter of years due to the savings made on energy bills.

Modern boilers are so efficient because they are condensing, meaning that they recover some of the heat from waste gasses that would otherwise be lost. Condensing boilers can be up to 30% more efficient than older, conventional boilers, making them better for the environment and cheaper to run.

New boilers are also far safer as they no longer rely on an open flue design. Open flue boilers draw the air required for combustion from the room. If the boiler can’t get the air it needs for complete combustion, fumes containing carbon monoxide will spill into the room rather than going up the chimney. This can be extremely dangerous and leave residents vulnerable to carbon monoxide poisoning.

Which system is best for me?
There are several factors to be considered when choosing a new boiler for your home. Space, number of bathrooms, budget and mains water flow rate must all be taken into account. Outlined below are some of the differences between the two most popular boiler types on the market, combination and system boilers.

Combination boilers
Combi boilers are highly efficient, ingenious space-saving appliances, which can provide your home with both central heating and instantaneous hot water without the need for a hot water cylinder.

They are best suited for homes with limited space and a maximum of two bathrooms.

The downside of combi boilers is that they heat mains water on demand. If there is more than hot water outlet (tap or shower) in use at once then the pressure is split between the two outlets, significantly reducing the output.

 
System boilers with unvented cylinders
System boilers provide hot water to both the radiators and storage cylinder simultaneously.

System boilers heat a large unvented cylinder of stored water, meaning you can use multiple hot water outlets at once without suffering a reduction in pressure. Unvented cylinders rely on mains pressured water and unlike vented cylinders, do not require a cold water storage tank in the loft. The downside of system boilers is that you will need room for both the boiler and the cylinder, which is why they are usually recommended for larger properties.

 
What should I consider when upgrading?
Upgrading your central heating system doesn’t come without its risks. Converting a system from gravity fed to pressurised can put old pipework under more than the current pressure, causing leaks and bursts, especially under concrete floors where pipework isn’t accessible. Also, certain outlets such as toilets, taps and showers can fail under higher pressures. Always get your current heating and water system checked by a professional before rushing into any new installation work.

 

Gas Safety Certificate

Compulsory Annual Checks by Registered Engineers

Are you a landlord? Then you need a Gas Safety Certificate.

An annual gas safety inspection is a legal requirement for landlords of tenanted properties. Although it’s not a legal requirement for homeowners, it is needed for most boiler manufacturer warranties, and usually for home insurance policies too.

As a landlord, it is your responsibility to ensure the safety of your tenants by making sure all gas appliances within the property are in safe working order. We will check the boiler, and if there is one, the hot water cylinder in the airing cupboard. The check should take about 30 minutes. However, it may take longer if there’s an urgent repair. We’ll take as long as is needed because above all, safety is of utmost importance to us.  We’ll let you know if there are any issues as we are doing our checks.

Ashley is an accredited Gas Safe engineer with years of experience. So, when he’s checked everything and he’s happy everything meets the Gas Safe standards, he’ll issue a gas safety certificate.

Then you’ll be good to go for the next 12 months.

It’s always a good idea to book an annual boiler service alongside a gas safety certificate.

Call us at 020 3858 0277 and we’ll take care of this for you.

 

Gas and Water Leak Repair

Gas Leaks

ASP Plumbing & Heating are experts in gas leak repairs.  It’s crucial that you address any issues you have with gas leaks because even in small amounts, exposure to natural gas can cause headaches or nausea.

More importantly, when natural gas doesn’t burn off properly, the gas begins to emit carbon monoxide, which can be very dangerous. Don’t ignore gas leaks, even if they appear to be minor.

If you can smell gas in your home, or are worried a carbon monoxide leak from a gas appliance, call the free 24-hour National Grid Emergency Helpline at 0800 111 999.

 

You will then be asked a series of questions to determine the nature of the gas leak and will be advised of appropriate safety precautions to take, which may include:

- Opening windows and doors;

- Avoiding naked flames;

- Avoiding electrical switches;

- Avoiding the use of your mobile phone;

- Avoiding the use of electrical items.

 

Once you have reported the gas leak, call ASP Plumbing & Heating at 020 3858 0277.

We are Gas Safe registered with 8 years of experience. We will track down that gas leak and repair it as quick as possible. We know that gas leaks are potentially very dangerous, so we do our best to get to you as soon as we can.

Water Leaks

Water leaks can go unnoticed for weeks, if not months, and can have a devastating effect on décor and even the structure of the building if left untreated. It is not uncommon for leaks under floors to rot structural timber, such as joists and bearers, which is why the issue must be addressed as soon as it is made apparent.

Leaks from baths and showers, caused by poor sealant or defective waste traps, are a common cause of water marks on ceilings. Damaged central heating pipes, hot and cold feeds and waste pipes can also be origins of water leaks.

If you suspect a leak in your home, try to monitor when it is as its worst. If the leak appears worse when you take a shower or bath, then the seals or waste pipes could be at fault. If the pressure on your heating system is constantly dropping, there could be a leak somewhere on the central heating circuit. Information such as this can be useful when it comes to locating a leak.

If you notice a water mark on a wall or ceiling, don’t delay in calling ASP Plumbing & Heating Services. We are experienced in locating household leaks and can usually diagnose the problem within an hour.

Burst Pipes

In the event of a burst pipe or major leak, try to locate your stopcock as quickly as possible. This will shut off the water supply to your property and can usually be found under the kitchen sink or within a water main cover outside of the property. Turning the stopcock clockwise will shut off the supply, however stopcocks often seize up when not used over a period of years. In this instance you will need to contact a professional plumber to shut off the supply before the repair is carried out.

 

Contact Us:

Boiler Repairs & Service

Plumbing and Heating

Smart Thermostat Installation

We work in the following areas and beyond:

Finchley, Hampstead, Hampstead Garden Suburb, Highgate, Muswell Hill, Friern Barnet, Crouch End, Harringay, Wood Green

Cal: 020 3858 0277

Plumbing
Valutazione
Location
London
Paese
United Kingdom
Indirizzo

Trova sulla mappa
numero di telefono
Mostra telefono
Sitoweb
https://need-a-pro.com/en/category/construction-and-repair/plumbers
Tipo annuncio
Ricerca di lavoro
Categoria
Construzione e riparazione
Sottocategoria
Idraulici
Data di inserimento
Giovedì, 14 Marzo 2019
8 mesi 1 settimana fa
Visualizzazioni
376
Id
1808
Pubblica nuovo annuncio